Q-Logic FC2354601-00 A Marine RADAR User Manual


 
6 Windows 2000 Driver Installation
QLDIRECT
6-4 FC2354601-00 A
6.4
QLDIRECT
The QLDIRECT driver, coupled with the QLogic Windows 2000 enhanced miniport
driver, provides the following features:
A highly optimized I/O path for normal read and write operations with reduced
CPU utilization and increased parallelization
Failover and failback features to reroute I/O operations to the correct path
This section provides installation instructions for the QLDIRECT driver in an already
installed Windows 2000 operating system. Earlier versions of this operating system
are not supported.
6.4.1
QLDIRECT Driver Files
Qldirect.sys requires the Ql2300.sys enhanced miniport driver version 7.00.00 or
above. The latest version of the QLDIRECT driver and Ql2300.sys enhanced
miniport driver for Windows 2000 are available on the QLogic Web site.
6.4.2
QLDIRECT Installation
If QLDIRECT is not installed on your system, perform the installation procedures in
section 6.4.2.1. If the QLFILTER driver is installed on your system, perform the
update procedures in section 6.4.2.2.
6.4.2.1
Initial Installation of QLDIRECT
Perform the following steps to add the QLDIRECT driver to a previously installed
Windows 2000 system:
1. If necessary, install the QLA2300 Windows 2000 enhanced miniport driver.
2. Insert the disk that contains the QLDIRECT driver in an appropriate drive.
3. Execute the Setup.exe installation program on the disk and follow the
instructions on the screen.
4. Remove the disk that contains the QLDIRECT driver.
5. Restart your system to load the driver.