Filter
Top Products
19
3. To transmit, hold down the push-to-talk button on the micro-
phone, hold the microphone 2–3 inches from your mouth,
and speak in a normal tone of voice.
TX
appears along with
a bar graph which shows the strength of your transmission.
4. When you finish transmitting, release the PTT button.
TX
and the signal strength bars disappear.
5. To turn off the transceiver, rotate
OFF/VOLUME
counterclock-
wise until it clicks.
NOTES ON SSB RECEPTION
• If the voice sounds distorted, slowly rotate
FINE
to bring the
signal into its natural voice tonal range.
• An SSB signal produces a fluttering, unintelligible sound
when received in the AM mode. Set the mode switch to
either LSB or USB, and adjust
FINE
. If the voice is still not
intelligible, it might be an SSB signal operating on the other
sideband — try the other SSB mode.
19-1110.fm Page 19 Friday, March 24, 2000 9:42 AM