Radio Shack HTX-10 Marine Radio User Manual


 
24
Using SHIFT
The transceiver’s shift function lets you set the transmit frequency
shift from the receive frequency in either direction within the
range of 0.0 Hz to 990 kHz.
Follow these steps to set the frequency shift direction and offset
frequency.
1. To set the frequency shift direction to
+
,
p
ress
PUSH FUNC
then press
SHIFT
while
FUNC
appears.
+SHIFT
appears.
Press
PUSH FUNC
and
SHIFT
again while
FUNC
appears to
set the frequency shift direction to
-
.
-SHIFT
appears
.
2. Press
PUSH FUNC
then
SHIFT
for about 3 seconds.
000
appears.
3. Rotate
TUNE
to set the offset frequency to any frequency
from 0 to 990 kHz.
4. To exit, hold down
PUSH FUNC
and
SHIFT
together for about
3 seconds.
Using T-LOW (Tone-Low)
Press
PUSH FUNC
then
T- L OW
to turn the high-cut filter on or off.
LOW
appears when the high-cut filter is on.
19-1110.fm Page 24 Friday, March 24, 2000 9:42 AM