Filter
Top Products
10 S1000 Autopilot Installation Guide
0
D7483-1
5.
Remove & retain the plug from the
helm pump lower connector, and
drain the fluid into one of the cups
provided. Discard the drained fluid in
accordance with local regulations.
6.
Label the port ram hose to aid future
reassembly, then disconnect both ram
hoses & straight connectors from the
helm pump.
Remove & retain the helm pump
breather cap.
4.
Set steering to dead ahead
and do not move it until
instructed.
3.
7.
Using the Installing tapered thread fittings
procedure, fit 'T' connectors to the helm pump
port and starboard connectors, and a straight
connector to the helm pump lower connector.
Connecting the autopilot pump, sheet 2
D7483-2
5.
Remove & retain the plug from the
helm pump lower connector, and
drain the fluid into one of the cups
provided. Discard the drained fluid in
accordance with local regulations.
6.
Label the port ram hose to aid future
reassembly, then disconnect both ram
hoses & straight connectors from the
helm pump.
Remove & retain the helm pump
breather cap.
4.
Set steering to dead ahead
and do not move it until
instructed.
3.
7.
Using the Installing tapered thread fittings
procedure, fit 'T' connectors to the helm pump
port and starboard connectors, and a straight
connector to the helm pump lower connector.
Connecting the autopilot pump, sheet 2
87040_5.book Page 10 Monday, April 30, 2007 5:58 PM