RuggedCom RS900W Marine Radio User Manual


  Open as PDF
of 7
 
3
© 2007 RuggedCom Inc. All rights reserved Rev100
Table of Contents
1 Software Upgrade.................................................................................................................. 4
1.1 Overview......................................................................................................................... 4
1.2 Assumptions................................................................................................................... 4
1.3 Software upgrade procedure .......................................................................................... 4
1.3.1 Step 1: File unpack and preparation........................................................................... 4
1.3.2 Step 2: File location.................................................................................................... 4
1.3.3 Step 3: Verify the ROS Software version.................................................................... 4
1.3.4 Step 4: Disable RSTP: ............................................................................................... 5
1.3.5 Step 5: Upgrade the IEEE 802.11 (Wireless) daughter-card firmware on RS900W
switch(es):............................................................................................................................... 5
1.3.6 Step 6: Reset the RS900W switch(es) ....................................................................... 5
1.3.7 Step 7: Login to the ROS console .............................................................................. 5
1.3.8 Step 8: Verify the IEEE 802.11 (Wireless) daughter-card firmware version: .............. 5
2 Example RS900W configurations......................................................................................... 6
2.1 Configuration for WPA2 enabled “Access Point” operation............................................. 6
2.2 Configure the RS900W for “Client / Bridge” operation.................................................... 6
2.3 Configure the RS900W for “Client / IP Bridge” operation................................................ 7
 previous next