Filter
Top Products
© 2011 Schneider Electric. All Rights Reserved.
63230-500-225A2 PowerLogic
TM
Series 800 Power Meter
3/2011 Chapter 3—Operation
25
Accumulated Operating Time Reset
Power Meter Diagnostics
To view the power meter’s model, firmware version, serial number, read and write registers,
or check the health status, you must access the HEALTH STATUS screen.
After viewing a feature, you may continue through the remaining features by returning to
the HEALTH STATUS screen and selecting one of the other options.
Once you have viewed the specific features, press
1;
until the display returns to the main
screen.
1. Press
###: to scroll through the Level 1 menu
until you see MAINT.
2. Press MAINT.
3. Press RESET.
4. Press
###: until TIMER is visible.
5. Press TIMER.
6. Enter the password (the default is 0000).
7. Press YES to reset the accumulated operating
time and to return to the RESET MODE screen.
NOTE: The accumulated days, hours, and
minutes of operation are reset to zero when you
press YES.
2%3%4/0%24)-%
./ 9%3
(/523
-).3
$!93
PLSD110284
HEALTH STATUS screen
NOTE: The wrench icon and the health status code
display when a health problem is detected. For
code 1, set up the Date/Time (see “DATE Setup”
and “TIME Setup” on pages 11 and 12). For other
codes, contact technical support.
-%4%2
(%!,4(34!453
2%' #,/#+
/+
PLSD110191