Filter
Top Products
FF520 Page 35
Figure 5.8 - Alarms menu
To set an Anchor Alarm, enter in a shallow water and depth value above and below your
actual anchoring depth. The alarm will sound when the depth becomes shallower or deeper
than the settings.
5.8.0 Shallow Water
Triggers an alarm when depth becomes shallower than the set depth.
5.8.1 Depth Water
Triggers an alarm when depth becomes deeper than the set depth.
5.8.2 Fish
The options for Fish Alarm set the size of the fishes that, if detected by the unit, switches
an alarm to sound. The options are: Off, Small, Medium, Big and Huge. The alarm sounds
if the set size (or bigger) is detected.
5.8.3 Temperature Upper
Triggers an alarm when the transducer reports a temperature above the set temperature.
5.8.4 Temperature Lower
Triggers an alarm when the transducer reports a temperature below the set temperature.
5.8.5 Temperature Rate
Triggers an alarm when the transducer reports a temperature variation rate above the set
temperature.
5.9 SAVE SETTINGS TO USER C-CARD
This option saves the complete set of Fish Finder settings to the User C-CARD. This is useful to avoid
the user having to retune up Fish Finder after a Clear RAM operation or a software update.
Figure 5.9 - C-Card - Save settings