Filter
Top Products
FF520 Page 9
2. MOUNTING THE FF520
The FF520 must be properly installed according the following instructions to get the best
possible performance.
NOTE
TRANSDUCER: refer to Chapter 3 and to the Installation Manual supplied with the Transducer.
2.0 INSTALLATION
The FF520 is designed to be mounted horizontally or vertically to enable it to be installed
in the most convenient position. Although the unit is water resistant, care must be taken to
select a location where it will not be subjected to spray or rain. After the cables have been
run, and connected as per Par. 2.1, mount the FF520 in the desired location using the
supplied hardware.
Figure 2.0 - The FF520 Installing
2.1 CONNECTIONS
Transducer /
Triducer
(Depth / Speed / Temp1)
Temp2 Input
NMEA / Alarm Output
Power Cable
Status LED
Tee Cable
to
GPS Chart Plotter
Figure 2.1 - The FF520