Page 29GX3500S
10.12 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel.
10.12.1 Selecting the Scan Type
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “SCAN Type” in the
“Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “Prior-
ity
” or “Memory.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
10.12.2 Memory Scanning
(
M-SCAN
)
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
CHANNEL selector knob. Press the
[
F
]
key followed
by the
[
2
(
MEM
)]
key, “MEM” will appear on the LCD
which indicates the channel has been programmed
into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press the
[
F
]
key followed by the
[
2
(
MEM
)]
key, “MEM” will disappear
in the LCD.
5. To start scanning, press the
[
F
]
key followed by the
[
3
(
SCAN
)]
key.
“M-SCAN” appears on the LCD. Scanning will pro-
ceed from the lowest to the highest programmed
channel number and will stop on a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the
[
16/9
]
,
[
WX
]
,
[
CALL
(
MENU
)]
, or PTT key.