Filter
Top Products
Page 43GX3500S
10. Enter the MMSI number by the keypad. If a mistake
was made entering in the number, pressing the
[
CLR
]
key to delete the wrong character.
11. To store the data entered, press and hold the
[
ENT
]
key.
12. To enter another individual address, repeat steps 4 through 12.
13. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
NOTE
Selecting “Next” or “Exit” will automatically save the name and MMSI
number into memory.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup
” menu.
3. Press the
[
ENT
]
key, then select “INDIV Reply” with
the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “Auto”
or “Manual.”
6. Press the
[
ENT
]
key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.