Standard Horizon GX3500S Marine Radio User Manual


 
Page 61GX3500S
12.2 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the
[
F
]
key followed by the
[
6
(
NAV
)]
key.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “Time Set” in the
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the
[
ENT
]
key to store the time offset.
6. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
OFFSET TIME TABLE