Filter
Top Products
2. In stal la tion in struc tions
»
These in stal la tion in struc tions are in tended for per sons with
skills in elec tri cal and me chan i cal ar eas due to their train ing, ex -
pe ri ence and re ceived in struc tions.
Per son nel us ing these in stal la tion in struc tions must be in -
structed in the reg u la tions for the pre ven tion of ac ci dents, the
op er at ing con di tions and safety reg u la tions and their im ple men -
ta tion.
En sure in each case that the per son nel are in formed.
The in stal la tion in struc tions pro vided in the cor re spond ing op er -
at ing in struc tions ap ply for all con nected equip ment.
Ob serve safety reg u la tions with re gard to lift ing gear han dling.
All in stal la tion work must be car ried out with the equip ment dis -
con nected from elec tri cal power and com pressed air sup ply.
L
For in stal la tion work tak ing place at heights of over approx.
1828.8 mm (6 ft.), use only lad ders or sim i lar equip ment and
work ing plat forms in tended for this pur pose. At greater
heights, the proper equip ment for pro tec tion against fall ing
must be worn.
Use only suit able lift ing gear which is in proper work ing or der
and load sus pen sion de vices with suf fi cient car ry ing ca pac -
ity. Do not stand or work un der sus pended loads!
Use suit able work shop equip ment
In stall the equip ment such that all parts are eas ily ac ces si ble;
this fa cil i tates main te nance and re pair work.
016-3MS
SSK-3
In stal la tion in struc tions 9