Filter
Top Products
2.1. Trans port
For trans port, only the ap pro pri ate lift ing gear should be used (e.g. fork lift or
work shop crane).
»
Ob serve the car ry ing ca pac ity of the lift ing gear.
Ob serve the safety in struc tions for the han dling of lift ing gear.
2.2. Set-up
The ar range ment of the hop per load ers may vary de pend ing on the type of de -
vice to be con veyed on and the ma te rial used. Fas ten ing onto fixed ma chine
throats is pro vided by means of strap re tain ers. How ever, ad di tional sup port of
the hop per loader is nec es sary if the de vices are not suf fi ciently ca pa ble of bear -
ing the load.
016-3MS
SSK-3
In stal la tion in struc tions 10
J
L
As sem bly