Filter
Top Products
4.2.1. Fine ad just ment of the fill ing level in the con veyor hop per
&
Be fore the fine ad just ment, carry through a ba sic ad just -
ment.
Dur ing op er a tion, care fully turn the ad just ment screw (A) of the level probe by
means of a screw driver un til the de sired fill -
ing level is reached.
&
Clock wise ro ta tion makes the fill ing level fall.
Coun ter clock wise ro ta tion makes the fill ing level rise.
If the fill ing level in the con veyor hop per can not be low ered far enough by means
of the level probe, the pres sure on the con trol and main te nance unit can be re -
duced step by step.
006-4MS
SSV 05
Set-up 23
A