Suunto SS019015000 Scuba Diving Equipment User Manual


 
By default, Air mode is activated when you enter dive mode. You
can change which mode is activated or turn dive mode off under
the general settings.
To change dive modes:
1. While in time mode, keep [DOWN] pressed.
2.
Press [SELECT] to enter Dive Mode.
3. Change to the desired mode with [UP] or [DOWN] and confirm
with [SELECT].
4. Press [MODE] to exit.
Each dive mode has its own settings which you need to adjust while
in the given mode.
To modify dive mode settings:
1. While in a given dive mode, keep [DOWN] pressed.
2. Press [DOWN] or [UP] to scroll through the settings.
3. Press [SELECT] to enter a setting.
4. Adjust the setting with [DOWN] or [Up] and confirm with
[SELECT].
5. Press [MODE] to exit.
NOTE:
Some settings cannot be changed until five (5) minutes
have elapsed after the dive.
3.11.1 Air mode
Air mode is for diving with regular air and has the following
settings:
39