Suunto SS019015000 Scuba Diving Equipment User Manual


 
NOTE: If no button is pressed in 15 seconds, the dive computer
will go back to the dive display without changing the gas mix. Upon
ascent, the computer prompts you to change gas when the PO
2
level you have set for the next mix allows a gas change. The prompt
is a low priority alarm followed by the "Change gas" beep, sounded
once. The Gas mix (O
2
%He) value blinks.
3.11.3 CCR mode
CCR mode is a dive mode dedicated to rebreather diving.
The CCR mode has the following settings:
CC gases (see
11.3.1 Closed-circuit gases
)
OC gases (see
11.3.2 Open-circuit gases
)
Setpoints (see
11.3.3 Setpoints
)
Personal/altitude adjustment (see
3.16 Personal and altitude
adjustments
)
Tank pressure pairing (see
3.25 Tank pressure
)
Tank pressure alarm (see
3.25.4 Tank pressure alarm
)
Depth alarm (see
3.8 Depth alarm
)
Dive time alarm (see
3.13 Dive time alarm
)
Sample rate (see
3.18 Sample rate
)
In CCR mode you can define up to three diluent gases and up to
eight bailout gas mixes. Use the setpoint settings to define your
high and low set points and switch depths (see
11.3.3 Setpoints
).
42