Filter
Top Products
The dive plan takes into account:
•
any calculated residual nitrogen
•
dive history from the past four days
To plan dives:
1.
Press [MODE] until you see PLAN NODEC.
2. The display briefly shows your remaining desaturation time
before continuing to the planning display.
3. Press [DOWN] or [UP] to scroll your upcoming dive depths. The
depth moves in 3 m (10 ft) increments from 9 m – 45 m (30 ft –
150 ft). The no-decompression time limit for the selected depth
is shown in the center of the display.
If you have dived at least once with Suunto Zoop Novo, the
SURFTIME + field appears. You can adjust the surface time with
[UP].
4. Between consecutive dives, you can press [SELECT] to adjust
surface time.
5. Press [MODE] to exit.
NOTE:
The dive planning mode is disabled if the dive computer
is in an error state (see 3.15 Error state (algorithm lock)) or if the
dive mode is off or in
Gauge
mode.
3.14 Dive time alarm
The dive time alarm can be activated and used for several purposes
to add to your diving safety. It is simply a countdown timer in
minutes.
39