Filter
Top Products
Deepstop is on by default in Air and Nitrox modes. To turn
deepstop off:
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [DOWN] to scroll to Deepstop and enter with [Select].
3. Press [UP] to toggle on/off.
4. Press [MODE] to exit.
3.19 Sample rate
The sample rate controls how often information from the dive is
saved to the active log. The default sample rate is 20 seconds in air
and nitrox modes, and 2 seconds in free dive mode.
To change the sample rate:
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [UP] to scroll to
Sample Rate
and press [SELECT].
3. Press [DOWN] or [UP] to change the rate and confirm with
[SELECT].
4.
Press
MODE
to exit.
The sample rate options in air and nitrox modes are: 10, 20, 30 and
60 seconds.
The sample rate options in free dive mode are: 1, 2 and 5 seconds.
46