Filter
Top Products
4.3 Changing strap to bungee
Use the optional bungee adapter to change between wrist strap
and bungee cord as needed.
To install the bungee:
1. Turn the dive computer over.
2. Remove each strap by depressing one end of the spring bar with
a small flat-head screwdriver or spring bar removal tool.
3. Attach the bungee adapters to each side of the case with the
spring bars. Ensure the spring bars are firmly in position by
pushing down on each end of the bar.
4. Thread the bungee cord through the adapters and securely tie
the ends.
5. Pull hard on the bungee to ensure the adapters are in position
and the cord knot is tight.
Watch the video on YouTube.
58