Suunto SS022220000 Scuba Diving Equipment User Manual


 
53.6
Mix1
Primary
4. Adjust the PO
2
(oxygen partial pressure) value with [DOWN] or
[UP] and accept with [SELECT].
5. Adjust other settings as needed.
6. Press [MODE] to exit.
NOTE: If the oxygen content of a mix is set to 22% or above,
the setting value remains until changed. It does not automatically
revert back to 21%.
3.11.3 Gauge mode
With Gauge mode, you can use Suunto Zoop Novo as a bottom
timer.
The timer in the center of the display shows dive time in minutes
and seconds and activates at the start of the dive. The total running
dive time, in minutes, is in the lower right corner.
The timer in the center of the display can be used as a stopwatch by
pressing [SELECT] during the dive.
Pressing [SELECT] resets the main timer and adds a bookmark to the
dive log. The previously-timed interval is displayed below the main
timer.
35