Filter
Top Products
3. Press [DOWN] or [UP] to toggle the timer on and confirm with
[SELECT].
4. Adjust the countdown duration with [DOWN] or [UP] and
conform with [SELECT].
5. Press [MODE] to exit.
3.12 Dive numbering
If the Suunto Zoop Novo has not counted the no-fly time down to
zero, then repetitive dives belong to the same dive series.
Within each series, the dives are given numbers. The first dive of the
series is DIVE 1, the second DIVE 2, and so on.
If you start a new dive with less than five (5) minutes at the surface,
Suunto Zoop Novo treats the new dive as part of the previous dive.
The dive time continues where it left off.
After five (5) minutes or more at the surface, any new dives are part
of a repetitive dive series. The dive counter displayed in the
planning mode adds one to each new dive in the repetitive series.
The planning mode allows you to review the no-decompression
limits on the next dive in a series.
3.13 Dive planning mode
The dive planning mode
PLAN NoDeco
can be used to plan a dive
that does not require decompression. You enter the depth of your
upcoming dive, and Suunto Zoop Novo calculates the maximum
time you can stay at that depth without requiring decompression
stops.
38