Filter
Top Products
10
TASCAM US-1200
3 – Installation
8
Driver installation procedures
1. Download the latest driver for the operating system you are
using from the TEAC Global Site (http://teac-global.com/)
and save it on the computer to be used with the unit.
2. Open the saved driver (zip file) on, for example, the
computer desktop.
3. Double-click the “setup.cmd file in the folder that was
created when you opened the zip file.
CAUTION
If you open a zip file without decompressing it and double-
click the “setup.cmd” file in the folder that opens, instal-
lation will not start. Right-click the zip file and, for example,
select “Extract All…” to decompress it and then try again.
4. When the language selection screen (below) appears, select
the language you prefer and then click the OK button. (The
screens and button names used in the following instructions
are for when English is selected.)
5. Click the “Install the driver” button when the screen below
appears.
6. Read the user license agreement and select “I accept the
agreement”.
Next, click the “Install” button to start installation.
7. When the following screen appears, connect the unit and
the computer with the included USB cable. Then, press the
unit’s STANDBY/ON switch to turn it on.
Computer
8. The following screen appears when installation has
completed.
Click the “Reboot now” button.
The installer will quit and the computer will restart.