24
TASCAM US-1200
5 – Mixer Panel Settings
Send effect
8
REVERB
This effect adds reverberations to the original sound. Multiple
sounds are delayed at various times with damping over time
that is as natural as possible to produce reverberations like
those of a hall, live-music club or studio, for example.
Reverb type switch
Use to select the type of reverb.
Depending on the type, the density and level of the
reverb sound changes.
Options: HALL (default), ROOM, LIVE, STUDIO, PLATE
PRE DELAY knob
Set the amount of delay until the first reverberations.
The larger the value, the larger the reverberations make
the room sound.
Range: 0–250 ms (default: 42 ms)
REVERB TIME knob
Set the amount of time that the reverberations continue.
The larger the value, the longer they continue.
Range: 0.1–10 s (default: 2.7 s)
Restoring settings to default values
To reset the mixer settings to their original values, use the
Windows File menu or the Mac TASCAM US-1200 Mixer Panel
menu.
Windows Mixer Panel menu
Mac Mixer Panel menu
8
Effect Reset
Select this to reset all the settings on the EFFECTS page. (See
“Resetting the effect settings” on page 25.)
8
Mixer Reset
Select this to reset the settings on the MIXER page. (See
“Resetting the mixer settings” on page 25.)
8
Close
Select to close the Mixer Panel.