Tekkeon MP3450-10 Marine Battery User Manual


 
10
Obtaining Adapters
Five adapter tips that fit most DC adapter jacks on a variety of portable devices are included with myPower
ALL Plus. If none of these tips fits snugly into your portable device power jack, please go to our
web site at www.tekkeon.com/mpadapters to determine which adapter tip you need for your device.
You can obtain most adapters through the web site, or by contacting Tekkeon by phone at 888-787-5888 or
1-714-832-1266. If available through Tekkeon, the adapter will be sent to you for a nominal fee.
Using the Extended Battery (MP3450-10)
You can double the capacity of myPower ALL Plus by adding the extra battery unit MP3450-10. When
MP3450-10 is added to MP3450/MP3450i, the battery capacity shown on the indicators includes the
capacity available with MP3450-10.
Adding the Extended Battery
1. Place MP3450i on top of MP3450-10 with both flat silver ends facing the same direction.
2. Connect the bracket with the 3-pin plugs inside to the silver ends of the devices.
The 3-pin plugs will mate with the battery port on each of the devices, and the
controls on the end of MP3450i will show through the bracket opening.
3. Connect the second bracket on the opposite end of the devices to hold
the units together securely.
4. Use MP3450i as you would normally.
Charging the Extended Battery
1. With MP3450-10 connected, charge MP3450i as described earlier. Both batteries will be charged at
the same time (in parallel).