Filter
Top Products
6
Select/Connect the Adapter Tip
1. Select the adapter tip that fits securely into the power jack on your
portable device.
2. Locate the polarity symbol on your device in the area around the
power connector jack:
WARNING: myPower ALL Plus supports Center Positive polarity only. If your device has a Center
Negative polarity, do not power the device with myPower ALL Plus; contact support@tekkeon.com
for assistance.
3. Connect the adapter tip to the power output cord
(but not the device).
If you are using a UA-xxx adapter (rather than
PA-xxx), you must insert the L34 adapter between
the adapter cord and UA-xxx adapter as shown.
Connect the Power Output Cord
1. Plug the large end of the power output cord into
the DC OUT jack on the end of myPower ALL Plus.
Center Negative
Center Positive
L34 Adapter for
myPower ALL Plus