Filter
Top Products
5
USER GUIDE
The 3-Pin Input port is designed to allow charging by smaller solar panels (lower than 25W), and
requires an optional Smart 3-Pin Adapter available from Tekkeon. To use the solar panel with this port,
the solar panel must have a minimum open circuit voltage of 15V. However, there is no minimum output
current requirement from the solar panel.
Using myPower ALL Plus
myPower ALL Plus can be used to power and/or charge any device that requires between 5 and 19V.
With devices that require higher voltage levels, like notebook computers and portable DVD players,
we recommend that you use myPower ALL Plus only to power the device. You will find that powering
without charging your higher voltage device will maximize the battery life of myPower ALL Plus, thus
letting you use your portable device even longer.
To use myPower ALL Plus to power and/or charge your device, take these steps which are described in
detail in the following sections.
• Select an adapter tip for your main device and connect the tip to the output cord.
• Connect the power output cord to myPower ALL Plus.
• Adjust the voltage level to match that of your device.
• Connect the adapter tip/output cord to your device.