Filter
Top Products
BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL
TOSHIBA
Tough Enough for Today’s World
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Slide the battery pack forward and lift it out.
1. Push the eject button to pop it out.
2. Press the eject button and remove the PC card.
NOTE: Before removing any PCMCIA device, make
sure it is “STOPPED” in the PC Card Manager.
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
3000 Series
MODULAR BAY REMOVAL
1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the modular bay device in the direction of the
arrow.
DVD-ROM/CDR-W DRIVE REMOVAL
Release
lever
Select baydevice
Battery pack
Battery
release lever
Eject button
PC card
DVD-ROM/CDR-W
M2.5x4 black screws
DVD-ROM/CDR-W bracket
DVD-ROM/CDR-W connector
1. Remove four M2.5x4 black screws securing the
DVD-ROM/CDR-W to the bracket.
2. Slide the DVD-ROM/CDR-W out of the bracket.
3. Disconnect the DVD-ROM/CDR-W connector from
the drive.