Filter
Top Products
MEMORY MODULE REMOVAL
1. Turn the computer upside down.
2. Remove two M2x3 black screws and remove the
memory cover.
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
TOSHIBA
Tough Enough for Today’s World
3000 Series
HDD REMOVAL
5. Remove two M3x4 silver screws securing the
HDD bracket to the drive and lift off the bracket.
6. Peel off the HDD insulator.
HDD REMOVAL
1. Turn the computer upside down.
2. Remove two M2.5x3 black screws securing
HDD assembly.
3. Slide the HDD assembly in the direction of the arrow
to disconnect from the system board.
4. Lift the HDD assembly out of the HDD bay.
.
M2.5x3 black screws
3. Spread the memory clips securing the memory
module and pull the memory module out of the
connector on a 45 degree angle.
HDD assy
M3x4 silver screws
HDD
bracket
HDD connector
Insulator
Memory
cover
M2x3 Black screws
Memory clips
Memory module