Filter
Top Products
E-18
West Marine VHF160 Radio Owner’s Manual
Mounting the Charger
You can mount the charger on any at surface.
1) Use the two holes at the base of the
charger as a template to mark the drill
holes.
2) Using a 1/8-inch (or 3 mm) drill bit, drill
two holes 1/2 inch (13mm) deep.
3) Use the provided screws to attach the
charger to the surface.
Charging the Battery
Your radio includes a charger and a
rechargeable battery pack. Place your radio in
the charger with the display facing forward.
Make sure that the CHARGE LED on the
charger turns orange.
Cautions:
Use only the battery and charger supplied with this radio.
Using a different charger or battery can damage the radio
and create a risk of re or shock.
The charger is not waterproof. If the charger falls into the
water, unplug it before attempting to remove it from the
water. After you remove the charger from the water, please
contact West Marine directly (see back cover for contact
information).
Wipe off dirt or shake water from your radio before placing
in the charger if your radio gets dirty or wet.