Filter
Top Products
20 Freedom HF Owner’s Guide
Operating in Shore Power Mode
Checking Battery Status
During inverter mode, you can check the battery status by pressing
the Select button until the Input Voltage LED (or Input Current
LED) illuminates. The battery voltage (or battery current) appears
in the three-digit LED display screen when the Input Voltage LED
(or Input Current LED) illuminates.
The normal operating battery voltage range is between 11 and 15
volts.
Checking Output Power
During Inverter mode, you can check how much power (displayed
in kW) the Freedom HF is supplying to the connected loads by
pressing the Select button until the Output Power LED illuminates.
Operating Several Loads at Once
If you are going to operate several loads from the Freedom HF, turn
them on one at a time after you have turned the inverter on.
Turning loads on separately helps to ensure that the inverter does
not have to deliver the starting current for all the loads at once, and
will help prevent an overload shutdown.
Turning the Audible Alarm ON or OFF
The Freedom HF’s audible alarm can be turned ON or OFF. Any
warnings such as fault conditions or imminent shutdown are both
displayed on the display panel’s screen and sounded on the alarm
speakers.
It is not possible to turn OFF the screen and prevent it from
displaying error codes but it is possible to turn OFF the audible
alarm.
NOTE: The alarm setting will reset to its default setting when the
Freedom HF’s Inverter Power button is turned OFF then turned ON again.
Freedom HF InvChg Owners Guide.book Page 20 Tuesday, April 29, 2014 12:10 PM