Filter
Top Products
32
SETUP AND HISTORICAL DATA SUMMARY
The following table is a summary of the values that may be changed through setup
or by accumulating historical data. The column on the right is provided to write down your
setup values or historical data. Be sure and know these values before calling for customer
service. Multiply voltage values by two for 24-volt systems.
PARAMETER DEFAULT VALUE SETUP VALUE
B1 V
CHARGED
13.2 (13.5 IF F05 IS ON) ______________
B2 V
CHARGED
13.2 (13.5 IF F05 IS ON) ______________
B1 AMPS
CHARGED
2% (4% IF F05 IS ON) ______________
B2 AMPS
CHARGED
2% (4% IF F05 IS ON) ______________
B1 BAT CAPACITY 200 Ah (800 IF F05 IS ON) ______________
B2 BAT CAPACITY 200 Ah (800 IF F05 IS ON) ______________
AMBIENT TEMP (F03) 70 °F ______________
BATTERY TYPE (F02) #0 LIQUID LEAD ACID ______________
POWER SHARE 30 A (OFF in Freedom 25) ______________
STANDBY 4 W ______________
B1 USER CEF (F06) 87% (90% FOR GELLED) ______________
B2 USER CEF (F06) 87% (90% FOR GELLED) ______________
TIME REMAINING (F01) 0 = INSTANTANEOUS ______________
Ah OR kWh(F04) OFF = Ah ______________
ALT. ENERGY MODE (F05) OFF ______________
TEMP. COEFFICIENT (F07) 0.5 ______________
PEUKERT'S EXP. (F08) 1.25 ______________
BATT #2 FOR CNTRL (F11) ON = YES ______________
BACKLIGHTING (F12) 130 ______________
DISCHARGE FLOOR (F13) 100% ______________
TEMP. COMP. (F14) OFF ______________
HISTORICAL DATA VALUE
B1 # of CEF RECALCS ______________
B2 # OF CEF RECALCS ______________
B1 AVG DEPTH OF DISCHARGE ______________
B2 AVG DEPTH OF DISCHARGE ______________
B1 DEEPEST DISCHARGE ______________
B2 DEEPEST DISCHARGE ______________
SOFTWARE REVISION ______________