Filter
Top Products
Features and functions
46
“RPM” indicator light comes on when the an-
alog tachometer is selected.
The “SPEED” indicator light blinks three
times, then comes on, if miles are selected as
the display units when the analog speedome-
ter/tachometer is switched to the speedome-
ter function.
Analog speedometer
The analog speedometer shows the water-
craft speed against water.
The large inner numbers on the meter show
the watercraft speed in miles per hour (mph)
and the small outer numbers show the speed
in kilometers per hour (km/h) when the speed-
ometer function is selected.
Analog tachometer
The analog tachometer shows the engine
speed.
The large inner numbers on the meter show
the engine speed (× 100 r/min) when the ta-
chometer function is selected.
EJU36800
“SPEED” indicator light
The “SPEED” indicator light comes on when
the analog speedometer is selected.
The “SPEED” indicator light blinks three times
in the following instances:
● The analog speedometer/tachometer is
switched to the speedometer function when
miles are selected as the display units.
● The display units of the multifunction infor-
mation center are switched to miles from ki-
lometers.
● Miles are selected as the display units when
the multifunction information center starts
operating.
EJU34960
“RPM” indicator light
The “RPM” indicator light comes on when the
analog tachometer is selected.
1 “Speed/RPM” button
2 “SPEED” indicator light
3 “RPM” indicator light
1 “SPEED” indicator light
1 “RPM” indicator light
UF1W11E0.book Page 46 Tuesday, May 27, 2008 8:50 AM