Filter
Top Products
Maintenance and care
90
If the steering is stiff or misadjusted, have a
Yamaha dealer service it.
EJU36590
Checking the shift cable
Place the shift lever in the reverse position.
Make sure that the reverse gate makes con-
tact with the stopper.
If the reverse gate does not make contact with
the stopper, have a Yamaha dealer service it.
EJU37030
Checking and adjusting the throttle
cable
Face the handlebars straight ahead, and then
check that the throttle cable moves back to
the set position smoothly and that the throttle
lever free play is within specification.
Squeeze and release the throttle lever. If the
throttle lever does not return smoothly, have a
Yamaha dealer service it.
If the specified throttle lever free play cannot
be obtained as described below, have a
Yamaha dealer make the adjustment.
FX SHO
(1) Remove the eight screws, and then re-
move the front handlebar cover.
(2) Slide the rubber cover away from the ad-
juster, and then loosen the locknut.
Difference of A and B:
Maximum 5 mm (0.20 in)
1 Stopper
1 Front handlebar cover
UF1W11E0.book Page 90 Tuesday, May 27, 2008 8:50 AM