Filter
Top Products
Operation
65
plete range and spring back to the idle posi-
tion when released.
EJU32611
Steering system
Check the handlebars for looseness.
Turn the handlebars as far as possible to the
right and left to make sure that operation is
smooth and unrestricted throughout the
whole range. Also, make sure that the jet
thrust nozzle moves as the handlebars are
turned, and that there is no free play between
the handlebars and the jet thrust nozzle.
Push the handlebars back and forth to check
that the tilt lever and handlebars are locked in
place. (See “Tilt lever” on page 35 for more in-
formation.)
EJU36581
Shift lever and reverse gate
WARNING
EWJ00031
Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.
Check the shift lever and reverse gate for
proper operation.
Make sure that the reverse gate goes down
completely when the shift lever is pulled up.
1 Tilt lever
UF1W11E0.book Page 65 Tuesday, May 27, 2008 8:50 AM