Filter
Top Products
Operation
54
plete range and spring back to the idle posi-
tion when released.
EJU37390
Steering system
Check the handlebars for looseness.
Turn the handlebars as far as possible to the
right and left to make sure that operation is
smooth and unrestricted throughout the
whole range. Also, make sure that the jet
thrust nozzle moves as the handlebars are
turned, and that there is no free play between
the handlebars and the jet thrust nozzle.
Pull the handlebars up and down to check that
the lock lever and handlebars are locked in
place. (See “Telescopic steering system” on
page 33 for more information.)
EJU36581
Shift lever and reverse gate
WARNING
EWJ00031
Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.
Check the shift lever and reverse gate for
proper operation.
Make sure that the reverse gate goes down
completely when the shift lever is pulled up.
1 Lock lever
1
UF2R10E0.book Page 54 Friday, October 31, 2008 9:14 AM