Filter
Top Products
Maintenance and care
81
● Throttle cable (handlebar end)
● Steering cable (handlebar end)
● Steering cable (jet thrust nozzle end)
● QSTS rod (jet thrust nozzle end)
● Shift cable (reverse gate end)
● Intermediate housing
Fill the intermediate housing with water-re-
sistant grease through the grease nipple
using a grease gun.
EJU34452
Checking the battery
Check the level of the battery electrolyte and
make sure that the negative (–) and positive
(+) battery leads are tightened securely.
Grease quantity:
Initial 10 hours or 1 month:
33.0–35.0 cm³ (1.12–1.18 US oz,
1.16–1.23 Imp.oz)
Every 100 hours or 12 months:
6.0–8.0 cm³ (0.20–0.27 US oz,
0.21–0.28 Imp.oz)
1 Grease nipple
1
UF2R10E0.book Page 81 Friday, October 31, 2008 9:14 AM