A SERVICE OF

logo

22
4 - Operations
Operator
mode
working Setpoint
displayed
Local
Setpoint display
Setpoint
modification
Setpoint entry.
The operation is
acknowledged by
one flash of the
display.
4.3 PARAMETER SETTING
Press $ or % momentarily to
change the value of 1 unit every
push
Continued pressing of $ or %
changes the value, at rate that
doubles every second. Releasing
the button the rate of change
decreases.
In any case the change of the value
stops when it has reached the
max/min limit set for the parameter.
In case of Setpoint modification:
press $ or % once to display
the local Setpoint instead of work-
ing Setpoint.
To evidence this change the dis-
play flashes once. Then the
Setpoint can be modified
4.3.1 NUMERIC ENTRY
(i.e. the modification of the Setpoint value from 275.0 to 240.0 )
after 2 sec.
—Lower
—Raise
275.0
274.8
275.0
274.8
230.0
274.8
240.0
274.8
240.0
°C