Points of Interest, also referred to as POIs, are stored in the database
and may be displayed on the map. Ports, airports, restaurants, hotels,
gas stations, public buildings, and others are considered Points of
Interest. They may be selected as a destination for navigation purposes.
You may only select nearby points of interest if the GPS signal
strength is sufficient.
In the main navigation screen, tap
.
The destination input screen will
open.
Tap the
entry field and
select the destination state if it is
not yet indicated.
In the destination input screen, tap
.
The POI nearby GPS position
screen will open.
Enter the radius around your
current position within which you
want to search for points of interest
into the
entry field.
Select the main category of points of interest to search for from the
list field. Only points of interest located within the indicated
radius will be displayed.
Select the subcategory of points of interest to search for from the
list field located to the right of the field.
Tap the
field to list the results.
Select the desired destination from the
field.
If you leave the field empty, all Points of interest
matching the selected category will be listed in the List results field.
