Your device has an SD card slot located in the bottom of the unit. Digital maps and other data
including MP3 files, AVI files and image files can be added. To install the memory card, insert
it with the contacts pointing up into the slot, and the label facing the front of the device. To
remove the card, power off the unit, slightly push in on the card to release it, then pull it out of
the slot.
1. First, clean the surface
of the suction cup and
windshield. Push the
center of the suction cup
firmly onto the windshield,
then press the suction
lever down. Note: The
suction cup adhesion is
affected by high and low
temperatures.
3. Connect the supplied
DC power adapter to the
12VDC connector located
on the right side of the
unit. Plug the other end
into a standard vehicle
cigarette outlet to charge
the internal battery.
2. Insert mounting tabs into
the bottom of unit. Squeeze
the left and right latches
on the sides of the mount.
Push the mount against
the unit and release the
latches to engage.
