A SERVICE OF

logo

Open as PDF
next previous
58 GPSMAP 3006C/3010C Owner’s Manual
MaIn Menu > Messages tab and alarMs tab
MaIn
Menu
Messages Tab
The Messages tab shows a list of messages generated by the
GPSMAP 3006C/3010C. Use the ROCKER to scroll through the messages. The
date and time when each message occurred is shown at the bottom of the tab.
Viewing Detailed Message Information
You can view detailed information about the message, such as date, time,
position, speed, course, and heading.
To view detailed information:
Highlightamessage,andpressENTER.Awindowopens,showing
detailedinformationfortheselectedmessage.
Alarms Tab
Use the Alarms tab to dene alarm settings. The Alarms tab is divided into four
sub tabs: System, Nav, and Sonar. If you have a GDL 30/30A Marine Weather
Satellite Receiver connected, the Weather sub tab is visible.
Alarm messages appear in red across the status bar or change the appearance of
a data eld if that eld shows alarm-related data (for example, depth or voltage).
Press QUIT to acknowledge an alarm message. The status bar and data eld
remain red while the alarm condition persists.
To set an alarm:
1. UsetheROCKERtohighlighttheSystem,Nav,Sonar,orWeather
subtab.
2. Highlighttheeldnexttothealarmyouwanttoset,andpressENTER.
3. Changethemodetothesettingyouwant,andpressENTER.
4. Repeatsteps1–3tosetadditionalalarms,andthenpressENTERwhen
nished.