Page 12 of 13 Rev: 1/21/2014 7:17 AM
After wiring in In-
LineLinc, the unit lets out
a continuous beep.
-LineLinc is issuing an error
the unit is wired
incorrectly.
Turn off the circuit breaker and try reinstalling
In-LineLinc. If you are still experiencing an
error beep, consult an electrician to help you
In-LineLinc trips the Arc
Fault Circuit Interrupter
(AFCI).
The AFCI might be too
sensitive.
Replace your AFCI with a less sensitive brand
or model from a hardware store with a
customer-friendly return policy. In-LineLinc
modules do not trip when used with the
following AFCI models:
• GE 15 Amp Combination Arc Fault
Breaker #THQL1115AFP2
• Murray 2-Pole Combination Type Arc
Fault Circuit Interrupter #MP215AFCP
There might be loose
connections within your
home’s wiring.
Install a powerline noise filter (such as a
FilterLinc) between the output and the lead.
If you have tried these solutions, reviewed this Owner's Manual, and still cannot resolve an issue you are
having with In-LineLinc Dimmer, please call the INSTEON Support Line at 1-800-762-7845.
