A SERVICE OF

logo

14-18 SUSPENSION
Suspension Arms
Stabilizer Installati on
Install:
Dampers [A] and Stabilizer [B]
Stabilizer Holders [C] and Bolts
Tighten:
Torque - Stabilizer Holder Bolts [D]: 23 N·m (2.3 kgf·m, 17
ft·lb)
Install:
Stabilizer Joints [E]
Hold the joint bolt with an Allen wrench, and tighten the
nut.
Torque - Stabilizer Joint Nuts [ F]: 48 N·m (4.8 kgf·m, 35 ft·lb)
Install:
Rear Wheels (see Wheels/Tires chapter)