ELECTRICAL SYSTEM 17-73
Actuator Control System
Engine Brake Actuator Installation
•
Apply grease and Install:
O-ring [A]
•
Apply molybdenum disulfide grease to the pin [B].
•
Apply grease to the trim seal [A] and install the cover [B].
•
Insert the pin into the collar [A] of the engine brake lever
assembly [B].
•
Wipe off any protruding grease.
•
Tighten the actuator mounting bolts following the tighten-
ing sequence [1 ∼ 3].
Torque - Engine Brake Actuator Mounting Bolts: 8.8 N·m
(0.90 kgf·m, 78 in·lb)
Actuator Control S ystem Outline
The actuator controller has a microprocessor that detects
vehicle speed, state of the selectable 2WD/4WD shift
switch, ignition switch, and the forward/reverse movement
of the vehicle in order to control the engine brake actuator
and selectable 2WD/4WD actuator.
