(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD ●Nothing is recorded.
(Neither music nor a disc name have been
recorded on this MD.)
●Replace the disc with a recorded disc.
Can’t COPY ●You tried to record from a disc which you are
not allowed to copy.
●Replace it with another disc which you can
copy from (regular CD).
Can’t EDIT ●A track cannot be edited. ●Change the stop position of the track and then
try editing it.
Can’t REC ●Recording cannot be performed correctly due to
vibration.
●Move the unit away from the source of vibration.
DEFECT ●Since this disc has scratches on it, the
recording operation was skipped.
●Replace the disc with another recordable disc.
Din UNLOCK ●Incorrect digital signals are input. ●Connect correct digital signals.
●Use the analog input jack.
DISC ERR ●The disc is damaged or there is no TOC on the
disc.
●Reload the disc or replace it.
DISC FULL ●The disc is out of recording space. ●Replace the disc with another recordable disc.
FOCUS ERROR ●The proper focus cannot be obtained. ●Reload the MiniDisc.
MD ERROR ●The unit has determined that it is out of order
by performing a self-diagnosis.
●Ask the store where you purchased this unit,
about repairs.
MECHA ERR* ●There is a mechanical problem and the disc is
not working properly.
●Turn off the power, and press the button.
NAME FULL ●The number of characters for the disc name or
track name exceeds 100.
●Shorten the disc or track name.
NO DISC ●A MiniDisc has not been loaded.
●The MiniDisc data cannot be read.
●Load a MiniDisc.
●Reload the MiniDisc.
NOT AUDIO ●The data recorded on this disc is not audio data. ●Select another track.
●Replace the MiniDisc.
PLAYBACK MD ●You tried to record on a playback-only disc.
●The data of disc names and track names are
not able to move from playback-only discs.
●Replace it with a recordable MiniDisc.
●Edit only the sound.
PROTECTED ●The MiniDisc is write protected. ●Move the write protection tab back to its original
position.
TEMP OVER ●The temperature is too high. ●Turn off the power, and wait for a while.
TOC ERR* ●The disc has a large amount of damage.
●TOC information cannot be read.
●The MD does not meet the specifications for
MDs.
●Replace the disc with another disc.
TOC FULL* ●There is no space left for recording character
information (track names, disc names, etc.)
●Replace it with another recordable disc.
TOC W ERROR ●The unit has determined that it is abnormal by
performing a self-diagnosis.
●Ask the store where you purchased this unit,
about repairs.
U TOC ERR* ●The TOC information on this disc does not
meet the MD specifications or it cannot be read.
●Replace it with another disc.
●Erase all the data, and try recording.
U TOC W ERR ●The TOC information could not be created
properly due to a mechanical shock or to
scratches on the disc.
●Turn off the power, and try to write the TOC
again. (Remove any source of shock or vibration
while writing.)
? DISC ●The data contains an error. ●Replace the disc with another disc.
0 0:00 ●Music is not being recorded. ●Replace the disc with a recorded disc.
*: Number or symbol
MD-R2
37
