SETTING THE CLOCK
When recording, the date and time are recorded on the Minidisc
(page 15).
■ Setting the date
1 Press the POWER button to turn the power on and press
the TIMER button.
2 Within 10 seconds, turn the jog dial until “TIME ADJUST”
appears.
3 Within 10 seconds, press the ENTER button.
● The unit will enter the date setting mode.
4 Set the “year” using the jog dial.
● When you turn the jog dial and let go, the year will change
up or down by one.
● The year 2000 or later is set as follows:
[00] indicates the year 2000
[01] indicates the year 2001
● The range of dates that can be entered is from January 1,
1997 to December 31, 2099.
5 Press the ENTER button to set the “year”.
6 Set the “month” repeating steps 4 and 5.
7 Set the “day” repeating steps 4 and 5.
● The unit will enter the time setting mode.
ENTER
DELETE/CLEAR
TIMER
POWER
DATE
CLOCK
CLOCK
DATE
CLOCK
7
6
5
4
3
2
1
AM
AM
Date setting mode
Each time the button is pressed,
the display will change.
Time setting mode
MD-R2
8
