■ WV-CU360CJ System Controller (TERMINAL MODE)
A template, on which “For Matrix Switcher (WJ-SX150)” is written, is provided with System Controller WV-CU360CJ. When
using the template, place it on the surface of the controller.
%3 Operation indicator (OPERATE)
Lights up when the controller's power is turned on.
%4 Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
%5 Alarm indicator (ALARM)
Lights up when an alarm condition exists.
%6 Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
%7 LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
%8 Camera indicator (CAMERA)
Lights up when the camera number appears on the
LED display.
%9 Busy indicator (BUSY)
Lights up when the higher-priority operator selects the
camera or monitor you are currently operating.
Operations from the system controller are disabled until
this indicator goes off.
^0 Prohibited indicator (PROHIBITED)
Blinks when an operator attempts to control a monitor
(or camera) that is already used by a higher-priority
operator or the operator has done the prohibited opera-
tion.
^1 Zoom wheel controller
This control is used for zooming cameras equipped
with the specific lens. Moving the control to the right will
zoom in the image. Moving the control to the left will
zoom out the image.
