Exporting data for “AVIC
FEEDS”
You can export data to an SD memory card for
browsing on the PC application.
The following data can be exported.
! Gas Mileage
! Drive Log
Gas Mileage
Entering the fueling information
p Up to 24 sets of “Gas Mileage” entries can
be stored. You can also export the data, as
described below.
If the entries reach the maximum number,
a new entry will overwrite the oldest one.
Gas Mileage function only assists you to cal-
culate your average mileage based on the in-
formation you input. The function does not
receive data directly from the vehicle.
1 Display the “Navigation Menu” screen.
2 Touch [Gas Mileage].
The “Gas Mileage” screen appears.
3 Touch [Gas Price].
The “Gas Price Calculation” screen appears.
4 Enter the following settings:
! [Distance]:
Enter the distance traveled since the pre-
vious fueling.
p The distance is entered automatically
only when the distance traveled since
the previous fueling is recorded.
! [Gas Pumped]:
Enter the amount of fuel pumped.
! [Gas Price/Unit]:
Enter the fuel unit price.
When all the items are entered, the fuel con-
sumption is displayed next to “Gas Mileage”.
5 Touch [OK].
The “Gas Price Calculation” screen appears.
And then touch [OK] to display the “Gas Mile-
age” screen.
Exporting the data of “Gas Mileage”
Exporting the “Gas Mileage” data to an SD
memory card is possible.
p The data stored in this navigation system
will be cleared as exporting it to the SD
memory card.
Other functions
En
65
Chapter
12
Other functions
