Sierra Wireless 20070914 Manual

A SERVICE OF

next previous

Universal Serial Bus (USB)

Rev 3.0B Feb.08 42

Installing the USB driver

1. Set the Port Type

VirtualEthernetportisthedefaultsettingfortheUSBport.If

youwanttoinstallthevirtualserialport,changetheUSBport

configurationusingthedirectionsabove.

2. Connect the PinPoint X to your

computer’s USB port

WhenyouconnectthePinPointXforthefirsttimetoaUSB

portonyourcomputer,Windowsshoulddetectanewdevice

andpromptyoutoinstallthedriver.

Note: Windows will see each port type as a different USB device and

will see every port on your computer separately. If you change the port

type on the PinPoint X or connect to a different USB port on your

computer or hub, Windows will see it as a new device.

Figure 6-2: Found New Hardware Wizard

a. TostarttheinstalloftheUSBvirtualEthernetdriver,

selectNo,notthistimeandclickNext.

b. SelectInstallfromalistofspecificlocationandclick

Next.