Chapter 31 DHCP
GS2200-24 User’s Guide
263
The following describes the DHCP relay information that the Switch sends to the
DHCP server:
31.4 DHCP Status
Click IP Application > DHCP in the navigation panel. The DHCP Status screen
displays.
Figure 130 IP Application > DHCP Status
The following table describes the labels in this screen.
Table 83 Relay Agent Information
FIELD LABELS DESCRIPTION
Slot ID (1 byte) This value is always 0 for stand-alone switches.
Port ID (1 byte) This is the port that the DHCP client is connected to.
VLAN ID (2 bytes) This is the VLAN that the port belongs to.
Information (up to 64 bytes) This optional, read-only field is set according to
system name set in Basic Settings > General Setup.
Table 84 IP Application > DHCP
LABEL DESCRIPTION
Relay Mode This field displays:
• None: if the Switch is not configured as a DHCP relay agent.
• Global: if the Switch is configured as a DHCP relay agent only.
• VLAN: followed by a VLAN ID if it is configured as a relay agent for
specific VLAN(s).
