A SERVICE OF

logo

Chapter 9 VLAN
GS2200-24 User’s Guide
93
9.5 Configure a Static VLAN
Use this screen to configure and view 802.1Q VLAN parameters for the Switch. To
configure a static VLAN, click Static VLAN in the VLAN Status screen to display
the screen as shown next.
Figure 44 Advanced Application > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 16 Advanced Application > VLAN > Static VLAN
LABEL DESCRIPTION
ACTIVE Select this check box to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes.
This name consists of up to 64 printable characters.
VLAN Group
ID
Enter the VLAN ID for this static entry; the valid range is between 1 and
4094.
Port The port number identifies the port you are configuring.